2.2W CRI90 Tape

24V DC single color, flexible CRI>90 LED strip delivering up to 198lm per foot with self-adhesive backing (always apply to clean surfaces). Perfect for retail applications where higher color rendering is needed to distinguish and enhance certain colors. With a beam angle of 120° individual light points are less visible creating a continuous glow. This strip has cut points every 3.93" / 100mm for maximum flexibility what length is concerned. Maximum run of 32.8ft, any length over 32.8ft must be run in parallel. Very low power consumption of 2.2W/ft. A 24V DC Constant Voltage LED driver is required (see driver options table). Reel length 49ft / 15m. Dimmable with 0-10V and MLV dimmers, with the suitable Aurora offering. IES files available on the Aurora website. 3 year warranty.

Spec Sheet


  • Single colour flexible LED strip with self adhesive backing (must be applied to clean surfaces)
  • Cut points every 3.93" / 100mm
  • 0.67" / 17mm between LEDs
  • Beam angle 120º
  • Maximum length of run 32.8" / 10m
  • For runs over 32.8' / 10m individual lengths should be connected in parallel
  • Requires 24V DC Constant Voltage LED driver
  • Very low power consumption - 2.2W per foot
  • Dimmable with 0-10V Dimmer.
  • Please order to the nearest foot. (Reel length 49' / 13m)
  • 3 Year Warranty
SKU Code Wattage Lumens Efficacy (LL/CW) Colour Temp (K) Ra Download
AR-ST901/30 2.2 167 76 3000 90
IES
AR-ST901/40 2.2 183 83 4000 90
IES
AR-ST901/60 2.2 198 90 6000 90
IES

AR-STCN105 12V / 24V Single Colour Tape Connector
AR-STIL102 12V / 24V 4" Tape Interconnection Lead
AR-STIL103 12V / 24V 1" Tape Interconnection Lead
AR-STPL101 12V / 24V 1' Tape Power Lead
AR-STPL104 12V / 24V 4" Tape Power Lead T-Connector
AU-CH100 Surface Profile
AU-CH100EC1 Channel End Cap
AU-CH100EC2 Cable Entry Channel End Cap
AU-CH101 Surface Profile
AU-CH101EC1 Channel End Cap
AU-CH101EC2 Cable Entry Channel End Cap
AU-CH102 Recessed Profile
AU-CH103 Recessed Profile
AU-CH103EC1 Channel End Cap
AU-CH103EC2 Cable Entry Channel End Cap
AU-CH104 Corner Profile
AU-CH104EC1 Channel End Cap
AU-CH104EC2 Cable Entry Channel End Cap
AU-CH105 Deep Profile
AU-CH105EC1 Channel End Cap
AU-CH105EC2 Cable Entry Channel End Cap
AU-CHC1 Channel Mounting Clip
AU-CHC2 Channel Mounting Clip
AU-CHPC1CL Clear Diffuser Cover
AU-CHPC1FR Frosted Diffuser Cover
AU-CHPC2FR Frosted Diffuser Cover
Input Voltage (Min)
24
Input Voltage (Max)
24
Input Voltage Type
DC
IP Rating
Dry Location
Height (Inches)
0.08
Lifetime (Hours)
30000
Width (Inches)
0.31
Dimmable
Yes
Positional Adjustment
Fixed

Download

Instruction Leaflet