12V DC RGB color changing, flexible LED tape with 3M self-adhesive tape for Wet Locations (IP65). Single RGB LED chip allows programmable settings including static colors and color changing modes dependent on the control system used. Distance between LEDs of 0.6'' / 16.6mm and cut point every 3 LEDs (0.98'' / 25mm). Low power consumption of 4.4W per ft. Requires 12V DC Constant Voltage LED driver. Multi-purpose LED tape that can be used for accent and architectural highlighting in both indoor and outdoor applications. Maximum run of 19.7ft / 6m, any length over 19.7ft / 6m must be run in parallel. Low power consumption of 4.4W/ft. A 12V DC Constant Voltage LED driver is required (see driver options table). Reel length 16ft / 4.87m. IES files available on the Aurora website. 3 year warranty.