Blade™ 8.5W 800mm Undercabinet Light

The slim profile, undercabinet light bar Blade™ can be adapted to suit the application. With multiple configurations, lengths can be connected using the link leads or the connectors making it ideal for use in kitchens, display cabinets and wardrobes. LED light points are eliminated by the frosted diffuser creating an even light distribution. Easy to install using the plug in power lead and a 12V LED driver.

Spec Sheet


  • Benefit from longer life and higher energy savings compared to traditional T4 & T5 fluorescent fittings
  • Suitable for mounting under, in or above kitchen cabinets, shelves, display cabinets, bookcases etc
  • Power and interconnection leads supplied separately for added customisation
  • Fittings can be used on their own, connected end to end, connected with the corner bar or using interconnection leads (maximum run of 2 metres)
  • Plug and play PIR sensor available as an accessory
  • PIR detection distance up to 1m, detection range 60°. Time lag can be adjusted to 1 minute or 5 minutes, distance and sensitivity can also be adjusted.
  • On/off touch switch allows independent control of interconnected fittings
  • Supplied with mounting clips
  • Requires 12V LED driver (sold separately)
  • 3 year warranty
SKU Code Wattage Lumens Colour Temp (K) Ra Beam Angle Download
EN-CL85T/30 8.5 480 3000 80 90
EN-CL85T/40 8.5 520 4000 80 90

EN-CLA1 Blade™ Connector Bar
EN-CLA2 Blade™ Corner Connector Bar
EN-CLA3 Blade™ 155mm Interconnection lead
EN-CLA4 Blade™ 500mm Interconnection lead
EN-CLP1 Blade™ 2m Mains Lead Without Plug
EN-CLPIR Blade™ PIR Sensor
Positional Adjustment
Fixed
Length (mm)
800
Width (mm)
25
Height (mm)
9
IP Rating
IP20
Dimmable
No
DALI
No
Input Voltage Type
AC
Input Voltage (Min)
12
Input Voltage (Max)
12
Lifetime (Hours)
30000
Switching Cycles
15000

Download

Instruction Leaflet