6 Channel Lighting Controller

6 Channel lighting control system, Up to 12 scenes available. Besides 6 direct outputs the AU-DMS607 can send DMX signals to control an additional 6 channels. Channel capacity - 4A per channel (total 8A, 24/7 or 12A, 4 hours/day). Each channel may be set to dimming or switch mode Infrared remote controller can recall 6 scenes, adjust dimming level and edit scenes. Suitable for control of leading edge dimmable electronic transformers, triac dimmable LED drivers, 230V LED lamps & tungsten lamps. Built-in timer can turn channels on or off at pre-set times. For use with resistive and inductive loads

Spec Sheet


  • 6 Channel lighting control system
  • Up to 12 scenes available
  • Besides 6 direct outputs the AU-DMS607 can send DMX signals to control an additional 6 channels
  • Channel capacity - 4A per channel (total 8A, 24/7 or 12A, 4 hours/day)
  • Each channel may be set to dimming or switch mode
  • Dimming level LED indicators
  • Infrared remote controller can recall 6 scenes, adjust dimming level and edit scenes
  • Suitable for control of leading edge dimmable electronic transformers, triac dimmable LED drivers, 230V LED lamps & tungsten lamps
  • Built-in timer can turn channels on or off at pre-set times
  • Fade in/out time setting allows smooth lighting transitions
  • For use with resistive and inductive loads
  • Over current and temperature detection
  • Leading edge phase control dimming

Length (mm)
212
Width (mm)
60
Height (mm)
118
Input Voltage Type
AC
Input Voltage (Min)
90
Input Voltage (Max)
240

Download